Heavy-Duty Subway Shock Absorber for Trains, Ideal for Chemical Environments

• Customization: Available
• After-sales Service: Issue 100% Recall
• Warranty: 180 Sky
• Material: Rubber Steel
• Certification: ISO10012, ISO/TS16949, ISO9001
• Car Make: Volkswagen, WuLing, Benz, BMW, Hyundai, Honda, Toyota, Jeep, Nissan, Ford, Buick, Chery, Chevrolet, Cadillac, Geely, Roewe, Audi, Peugeot, Lexus, Volvo, Mazda, Kia
• Position: Chassis System
• OEM: Yes
• Type: Chassis System
• Applicable Temperature: From Minus 60 Degrees to Plus 300 Degrees
• Scope of Application: Various Chemical Substances
• Custom Specifications: Customizability Can Reach up to 500 Centimeters
• Transport Package: Packaging Bag; Cardboard Box
• Trademark: Anran
• Origin: China Hebei
• HS Code: 8708809000
• Production Capacity: 500000pieces/Yaer

Product Description

The rubber absorber is a sophisticated piece of equipment engineered to transform mechanical vibrations' kinetic energy into heat energy. This conversion is masterfully achieved through the rubber material's high elastic deformation properties, ensuring efficient energy absorption and noise reduction.
Its core functionalities include:
Energy dissipation: By leveraging the effects of viscous shear and elastic hysteresis, it brilliantly consumes vibration energy, thus minimizing unwanted mechanical disturbances.
Momentum isolation: It effectively obstructs the transmission path of vibrations, significantly curtailing the potential for system resonance, which could lead to detrimental effects.
Buffer protection: The system adeptly absorbs shock loads, thereby safeguarding the equipment and notably extending its service life.
Zhongmu Rubber is passionately committed to advancing both existing and innovative products, delivering high-quality, high-performance isolation solutions that cater to diverse customer needs.

1.Typical construct type comparison:

structured type	structure characteristics	Dynamic performance parameters	application scenarios
Solid compression type	Single rubber column (no reinforced layer)	Scirrhosity ShoreA70-90	Low-frequency and large-amplitude industrial equipment
Fiber enhancement type	Rubber matrix + aramid fiber woven mesh	shear modulus≥15MPa	Earthquake absorption of high-speed rail transit
Metal nested type	Aluminum alloy shell + rubber lining	radial rigidity ≥500N/mm	Generator set vibration isolation
Multi-layer compound	NBR base layer + EPDM damping layer + silicone surface layer	thermal adaptability -50~+200ºC	Semiconductor equipment precision vibration isolation

2.Exploration of classical structures and their comprehensive classification.

structure type	operational principle	typical parameter	application scenarios
Compressed shock absorber	The rubber column is deformed by the axial compression	Scirrhosity60-90 ShoreA,compression ratio≥30%	Car suspension, machine tool shock absorption
Cut-type shock absorber	Rubber sheets produce shear deformation under shear sheets	shear modulus≥10MPa,thickness2-5mm	Electronic equipment, building vibration isolation
Compound shock absorber	Rubber + spring / hydraulic pressure works together	Nonlinear stiffness characteristics, with adjustable damping	Heavy machinery, high-speed rail track
Damage liner	Thin-walled rubber sleeve covers the rotating shaft	radial rigidity 50-500N/mm,friction(al) coefficient 0.1-0.3	Rotary shaft frame vibration control

3.Material type selection system:

Rubber type	dynamic modulus (MPa)	temperature range(-40ºC~+150ºC)	oil resistivity (70#)	Typical application
NBR	2-5	-40ºC~+120ºC	Volume change rate<10%	Automobile shock absorber, hydraulic cylinder bushing
EPDM	3-8	-50ºC~+180ºC	Volume change rate<5%	Building vibration isolation cushion, wind power sealing
SBR	2-4	-20ºC~+100ºC	Volume change rate<15%	Industrial floor damping pad
IIR	1-3	-40ºC~+80ºC	Volume change<8%	Precision instrument vibration absorber

4.International standards and extensive test range.

criterion	test project	technical requirement
ISO 9001	quality management system	Whole-process traceability
GB/T 10179	Experimental method of rubber shock absorber	The deformation was <20% after 10 ^ 6 cycles
ASTM D3452	Schematic drawing test	Rehome rate is> 70%
IEC 60068-2-6	Environmental experiments	-40ºC ~ + 85ºC cycle aging

5.Analysis of failure modes and proposals for structural improvements.

failure mode	analysis of causes	Improve the plan
surface checking	UV aging (> 2000h exposure)	Add UV absorber (carbon black N330)
The central hole collapsed	Localized overload (> 150% rated load)	Set the safety factor (≥2.5)
Damage recession	Liquid erosion (ASTM D471 test)	HNBR oil resistant rubber
Install stress cracking	Taper fitting (H7 / p6)	Add flexible spacer (Shaw 30-50A)

6.Insightful look into typical application scenarios and diverse product types.

device type	Application site	vibration performance	Type of shock absorber	Type of shock absorber
excavator	Rotary turning platform and walking mechanism	Low-frequency (2-10Hz) axial vibration	Compressed shock absorber	Hardness of Shore A 70-90, compression rate of 30%
crane	Hanging arm, balance beam	Intermediate frequency (10-50Hz) torsional vibration	Cut-type shock absorber	Shear modulus of 15MPa, 5-8mm in thickness
loader	Hanging arm, balance beam	High-frequency (50-200Hz) random vibration	Compound shock absorber	Rubber + metal skeleton, with a damping ratio of ζ =0.8-0.9
road roller	Shbrator, self-walking wheel	Impact load (5-10ms pulse)	hydraulic buffer	Ababsorbed energy 200 kJ with response time <50ms
shield tunneling machine	Spindle drive, pipe segment assembly machine	Multi-axial synchronous vibration (axial + radial)	3 D shock absorption module	Flexible connection design, torsional torque 500 N·m

7.Efficient manufacturing process flow:
1.Material Premixing:
Advanced Hot Feeding System: Maintains a precise temperature control of ± 1°C to ensure material consistency and uniformity.
Exemplary Fiber Dispersion: Achieving 95% dispersion efficiency, verified with a laser particle size analyzer for optimal performance.
2.Molding Process:
Compression Molding: Operated at a mold temperature of 60°C and a pressure of 15MPa, with a precise pressure holding time of 30 minutes for perfect molding.
Injection Molding: Utilizes screw speeds between 50 to 100 rpm, with injection temperatures finely tuned from 80 to 120°C.
Vacuum Vulcanization: Conducted at a pressure of 0.95MPa and a temperature of 150°C for 60 minutes, ensuring quality vulcanization.
3.Reprocessing:
Surface Treatment: Applied with a polyurethane anti-fouling coating at a thickness of 0.2mm for superior surface protection.
Performance Optimization: Enhanced by microwave vulcanization, offering a remarkable 40% efficiency improvement with temperature variance maintained within ± 2°C.