Heavy-Duty Rubber Bushings for Various Chemicals and Custom Lengths

• Customization: Available
• After-sales Service: Issue 100% Recall
• Warranty: 180 Sky
• Position: Chassis System
• Type: Chassis System
• Applicable Temperature: From Minus 60 Degrees to Plus 300 Degrees
• Scope of Application: Various Chemical Substances
• Custom Specifications: Customizability Can Reach up to 500 Centimeters
• Transport Package: Packaging Bag; Cardboard Box
• Trademark: Anran
• Origin: China Hebei
• HS Code: 8708809000
• Production Capacity: 500000pieces/Yaer

Product Description

Experience next-level innovation with our cutting-edge rubber absorber, a marvel of modern engineering that effortlessly transforms mechanical vibration kinetic energy into soothing heat energy. This remarkable conversion process is powered by the rubber's superior high elastic deformation characteristics, offering you efficiency that stands the test of time, along with durability that remains unmatched.
At its essence, this product is enriched with a spectrum of vital functions:
Energy dissipation: Masterfully converting vibration energy, this process employs both viscous shear and elastic hysteresis effects to achieve peak performance and deliver results of exceptional quality.
Momentum isolation: Expertly blocks the vibration transmission pathways, significantly reducing system resonance and enhancing the overall stability and reliability of your systems.
Buffer protection: Designed to absorb shock loads with precision, this feature extends the lifespan of your equipment considerably, promising you remarkable long-term dependability.
Zhongmu Rubber remains steadfast in its commitment to pioneering both current and avant-garde products. We continually offer isolation solutions that not only promise high performance but also adapt to the dynamic needs of our esteemed customers, ensuring high quality and satisfaction.

1.Typical Construct Type Comparison: Explore the nuanced differences and advantages of various construct types, uncovering their distinct benefits.

structured type	structure characteristics	Dynamic performance parameters	application scenarios
Solid compression type	Single rubber column (no reinforced layer)	Scirrhosity ShoreA70-90	Low-frequency and large-amplitude industrial equipment
Fiber enhancement type	Rubber matrix + aramid fiber woven mesh	shear modulus≥15MPa	Earthquake absorption of high-speed rail transit
Metal nested type	Aluminum alloy shell + rubber lining	radial rigidity ≥500N/mm	Generator set vibration isolation
Multi-layer compound	NBR base layer + EPDM damping layer + silicone surface layer	thermal adaptability -50~+200ºC	Semiconductor equipment precision vibration isolation

2.Classical Structure and Its Classification: Dive into the world of traditional structural forms and their systematic classifications for a comprehensive understanding.

structure type	operational principle	typical parameter	application scenarios
Compressed shock absorber	The rubber column is deformed by the axial compression	Scirrhosity60-90 ShoreA,compression ratio≥30%	Car suspension, machine tool shock absorption
Cut-type shock absorber	Rubber sheets produce shear deformation under shear sheets	shear modulus≥10MPa,thickness2-5mm	Electronic equipment, building vibration isolation
Compound shock absorber	Rubber + spring / hydraulic pressure works together	Nonlinear stiffness characteristics, with adjustable damping	Heavy machinery, high-speed rail track
Damage liner	Thin-walled rubber sleeve covers the rotating shaft	radial rigidity 50-500N/mm,friction(al) coefficient 0.1-0.3	Rotary shaft frame vibration control

3.Material Type Selection System: Navigate a strategic path for choosing the ideal material type across a multitude of applications, ensuring results that are nothing short of optimal.

Rubber type	dynamic modulus (MPa)	temperature range(-40ºC~+150ºC)	oil resistivity (70#)	Typical application
NBR	2-5	-40ºC~+120ºC	Volume change rate<10%	Automobile shock absorber, hydraulic cylinder bushing
EPDM	3-8	-50ºC~+180ºC	Volume change rate<5%	Building vibration isolation cushion, wind power sealing
SBR	2-4	-20ºC~+100ºC	Volume change rate<15%	Industrial floor damping pad
IIR	1-3	-40ºC~+80ºC	Volume change<8%	Precision instrument vibration absorber

4.International Standard and Test Range: Conform to global standards and delve into the extensive test range that assures unparalleled quality.

criterion	test project	technical requirement
ISO 9001	quality management system	Whole-process traceability
GB/T 10179	Experimental method of rubber shock absorber	The deformation was <20% after 10 ^ 6 cycles
ASTM D3452	Schematic drawing test	Rehome rate is> 70%
IEC 60068-2-6	Environmental experiments	-40ºC ~ + 85ºC cycle aging

5.Failure Mode and Structural Improvements: Examine potential failure modes and delve into innovative structural enhancements to mitigate them effectively.

failure mode	analysis of causes	Improve the plan
surface checking	UV aging (> 2000h exposure)	Add UV absorber (carbon black N330)
The central hole collapsed	Localized overload (> 150% rated load)	Set the safety factor (≥2.5)
Damage recession	Liquid erosion (ASTM D471 test)	HNBR oil resistant rubber
Install stress cracking	Taper fitting (H7 / p6)	Add flexible spacer (Shaw 30-50A)

6.Typical Application Scenarios and Product Types: Gain a profound insight into common application scenarios and the diverse array of available product types.

device type	Application site	vibration performance	Type of shock absorber	Type of shock absorber
excavator	Rotary turning platform and walking mechanism	Low-frequency (2-10Hz) axial vibration	Compressed shock absorber	Hardness of Shore A 70-90, compression rate of 30%
crane	Hanging arm, balance beam	Intermediate frequency (10-50Hz) torsional vibration	Cut-type shock absorber	Shear modulus of 15MPa, 5-8mm in thickness
loader	Hanging arm, balance beam	High-frequency (50-200Hz) random vibration	Compound shock absorber	Rubber + metal skeleton, with a damping ratio of ζ =0.8-0.9
road roller	Shbrator, self-walking wheel	Impact load (5-10ms pulse)	hydraulic buffer	Ababsorbed energy 200 kJ with response time <50ms
shield tunneling machine	Spindle drive, pipe segment assembly machine	Multi-axial synchronous vibration (axial + radial)	3 D shock absorption module	Flexible connection design, torsional torque 500 N·m

7.Manufacturing Process Flow: Gain a comprehensive insight into our sophisticated and efficient manufacturing processes, ensuring unparalleled quality and precision.
1.Material Premixing: A crucial initial phase ensuring optimal material consistency and quality.
Hot Feeding System: Precision temperature control maintained at ± 1°C to ensure uniformity, forming a fundamental part of our quality assurance protocol.
Fiber Dispersion: Achieving an impressive 95% dispersion, confirmed by laser particle size analysis for consistency and peak performance.
2.Molding Process: A refined process ensuring immaculate product formation and superior quality at every step.
Compression Molding: With mold temperature precisely set at 60°C and pressure at 15MPa, this methodology ensures consistent quality, with a pressure holding time of 30 minutes to achieve optimal results.
Injection Molding: Featuring a screw speed range of 50 to 100 rpm and injection temperatures spanning 80 to 120°C, this process delivers versatile and precise outcomes.
Vacuum Vulcanization: Executed at a pressure of 0.95MPa and a temperature of 150°C over 60 minutes, ensuring material properties and performance of the highest caliber.
3.Reprocessing: A pivotal phase in enhancing the product's finish and performance.
Surface Treatment: Employing a spray polyurethane anti-fouling coating with a 0.2mm thickness, this treatment ensures a finish that is not only durable but pristine.
Performance Optimization: By employing microwave vulcanization, we achieve an impressive 40% efficiency improvement, maintaining a temperature variance of ± 2°C for optimal performance.