Anran Wear-Resistant Bushings for Forklifts and Excavators Available

• Customization: Available
• After-sales Service: Issue 100% Recall
• Warranty: 180 Sky
• Material: Rubber Steel
• Certification: ISO10012, ISO/TS16949, ISO9001
• Car Make: Volkswagen, WuLing, Benz, BMW, Hyundai, Honda, Toyota, Jeep, Nissan, Ford, Buick, Chery, Chevrolet, Cadillac, Geely, Roewe, Audi, Peugeot, Lexus, Volvo, Mazda, Kia
• Position: Chassis System
• OEM: Yes
• Type: Chassis System
• Applicable Temperature: From Minus 60 Degrees to Plus 300 Degrees
• Scope of Application: Various Chemical Substances
• Custom Specifications: Customizability Can Reach up to 500 Centimeters
• Transport Package: Packaging Bag; Cardboard Box
• Trademark: Anran
• Origin: China Hebei
• HS Code: 8708809000
• Production Capacity: 500000pieces/Yaer

Product Description

The robust absorber is a revolutionary piece of equipment designed to transform mechanical vibration kinetic energy into heat. This heat is effectively absorbed thanks to the superior elastic deformation properties inherent to our high-quality rubber material.
The core functionalities of this exceptional product include:
Energy Dissipation: Masterfully consumes vibration energy through the sophisticated use of viscous shear and elastic hysteresis effects.
Momentum Isolation: Skillfully interrupts the vibration transmission path, significantly reducing the potential for system resonance.
Buffer Protection: Expertly absorbs shock loads to dramatically extend the longevity and reliability of your equipment.
At Zhongmu Rubber, we are passionately committed to advancing both time-tested and innovative products, ensuring that our customers receive unparalleled high-quality and high-performance isolation solutions.

1.Typical Construct Type Comparison: A detailed analysis of different construction types for tailored applications.

structured type	structure characteristics	Dynamic performance parameters	application scenarios
Solid compression type	Single rubber column (no reinforced layer)	Scirrhosity ShoreA70-90	Low-frequency and large-amplitude industrial equipment
Fiber enhancement type	Rubber matrix + aramid fiber woven mesh	shear modulus≥15MPa	Earthquake absorption of high-speed rail transit
Metal nested type	Aluminum alloy shell + rubber lining	radial rigidity ≥500N/mm	Generator set vibration isolation
Multi-layer compound	NBR base layer + EPDM damping layer + silicone surface layer	thermal adaptability -50~+200ºC	Semiconductor equipment precision vibration isolation

2.Classical Structure and Its Classification: Comprehensive insights into traditional structures and their diverse classifications.

structure type	operational principle	typical parameter	application scenarios
Compressed shock absorber	The rubber column is deformed by the axial compression	Scirrhosity60-90 ShoreA,compression ratio≥30%	Car suspension, machine tool shock absorption
Cut-type shock absorber	Rubber sheets produce shear deformation under shear sheets	shear modulus≥10MPa,thickness2-5mm	Electronic equipment, building vibration isolation
Compound shock absorber	Rubber + spring / hydraulic pressure works together	Nonlinear stiffness characteristics, with adjustable damping	Heavy machinery, high-speed rail track
Damage liner	Thin-walled rubber sleeve covers the rotating shaft	radial rigidity 50-500N/mm,friction(al) coefficient 0.1-0.3	Rotary shaft frame vibration control

3.Material Type Selection System: A sophisticated methodology for selecting the optimal material type.

Rubber type	dynamic modulus (MPa)	temperature range(-40ºC~+150ºC)	oil resistivity (70#)	Typical application
NBR	2-5	-40ºC~+120ºC	Volume change rate<10%	Automobile shock absorber, hydraulic cylinder bushing
EPDM	3-8	-50ºC~+180ºC	Volume change rate<5%	Building vibration isolation cushion, wind power sealing
SBR	2-4	-20ºC~+100ºC	Volume change rate<15%	Industrial floor damping pad
IIR	1-3	-40ºC~+80ºC	Volume change<8%	Precision instrument vibration absorber

4.International Standard and Test Range: Adherence to global standards and extensive testing processes.

criterion	test project	technical requirement
ISO 9001	quality management system	Whole-process traceability
GB/T 10179	Experimental method of rubber shock absorber	The deformation was <20% after 10 ^ 6 cycles
ASTM D3452	Schematic drawing test	Rehome rate is> 70%
IEC 60068-2-6	Environmental experiments	-40ºC ~ + 85ºC cycle aging

5.Failure Mode and Structural Improvements: In-depth examination of failure modes and strategic structural enhancements.

failure mode	analysis of causes	Improve the plan
surface checking	UV aging (> 2000h exposure)	Add UV absorber (carbon black N330)
The central hole collapsed	Localized overload (> 150% rated load)	Set the safety factor (≥2.5)
Damage recession	Liquid erosion (ASTM D471 test)	HNBR oil resistant rubber
Install stress cracking	Taper fitting (H7 / p6)	Add flexible spacer (Shaw 30-50A)

6.Typical Application Scenarios and Product Types: Explore versatile applications and diverse product offerings.

device type	Application site	vibration performance	Type of shock absorber	Type of shock absorber
excavator	Rotary turning platform and walking mechanism	Low-frequency (2-10Hz) axial vibration	Compressed shock absorber	Hardness of Shore A 70-90, compression rate of 30%
crane	Hanging arm, balance beam	Intermediate frequency (10-50Hz) torsional vibration	Cut-type shock absorber	Shear modulus of 15MPa, 5-8mm in thickness
loader	Hanging arm, balance beam	High-frequency (50-200Hz) random vibration	Compound shock absorber	Rubber + metal skeleton, with a damping ratio of ζ =0.8-0.9
road roller	Shbrator, self-walking wheel	Impact load (5-10ms pulse)	hydraulic buffer	Ababsorbed energy 200 kJ with response time <50ms
shield tunneling machine	Spindle drive, pipe segment assembly machine	Multi-axial synchronous vibration (axial + radial)	3 D shock absorption module	Flexible connection design, torsional torque 500 N·m

7.Manufacturing Process Flow: A seamless overview of the step-by-step manufacturing process.
1.Material Premixing: An essential first step in ensuring consistency and quality.
Hot Feeding System: Features precise temperature control ± 1°C, crucial for maintaining material uniformity.
Fiber Dispersion: Achieves an impressive 95% dispersion, verified by a cutting-edge laser particle size analyzer.
2.Molding Process: A critical phase in product formation.
Compression Molding: Implements a mold temperature of 60°C, pressure at 15MPa, and a pressure holding time of 30 minutes.
Injection Molding: Utilizes a screw speed between 50-100 rpm and injection temperatures from 80-120°C.
Vacuum Vulcanization: Conducted at 0.95MPa pressure, 150°C temperature, over a 60-minute duration.
3.Reprocessing: The final touches for peak performance.
Surface Treatment: Applies a 0.2mm thick spray polyurethane anti-fouling coating for enhanced durability.
Performance Optimization: Incorporates microwave vulcanization for a remarkable 40% efficiency boost, with temperature variance tightly controlled at ± 2°C.