Durable Automobile Bushings and Mining Card Rubber Parts for Sale

• Customization: Available
• After-sales Service: Issue 100% Recall
• Warranty: 180 Sky
• Material: Rubber Steel
• Certification: ISO10012, ISO/TS16949, ISO9001
• Car Make: Volkswagen, WuLing, Benz, BMW, Hyundai, Honda, Toyota, Jeep, Nissan, Ford, Buick, Chery, Chevrolet, Cadillac, Geely, Roewe, Audi, Peugeot, Lexus, Volvo, Mazda, Kia
• Position: Chassis System
• OEM: Yes
• Type: Chassis System
• Transport Package: Packaging Bag; Cardboard Box
• Trademark: Anran
• Origin: China Hebei
• HS Code: 8708809000
• Production Capacity: 500000pieces/Yaer

Product Description

The robber absorber is an ingenious device engineered to transform the kinetic energy from mechanical vibrations into heat energy. This heat is then seamlessly absorbed by the remarkable high elastic deformation properties of our premium rubber material.
Its core functions encompass a triad of vital capabilities:
Energy dissipation: Through the clever use of viscous shear and elastic hysteresis effects, it effectively consumes vibration energy with finesse.
Momentum isolation: It adeptly obstructs the vibration transmission path, significantly diminishing the risk of system resonance.
Buffer protection: By absorbing shock loads, it not only shields the equipment but also extends its service life remarkably.
Zhongmu Rubber stands at the forefront of innovation, committed to developing both existing and new products. We proudly offer our clientele high-quality, high-performance isolation solutions tailored to their needs.

1.A comprehensive comparison of typical construct types to guide optimal selection.

structured type	structure characteristics	Dynamic performance parameters	application scenarios
Solid compression type	Single rubber column (no reinforced layer)	Scirrhosity ShoreA70-90	Low-frequency and large-amplitude industrial equipment
Fiber enhancement type	Rubber matrix + aramid fiber woven mesh	shear modulus≥15MPa	Earthquake absorption of high-speed rail transit
Metal nested type	Aluminum alloy shell + rubber lining	radial rigidity ≥500N/mm	Generator set vibration isolation
Multi-layer compound	NBR base layer + EPDM damping layer + silicone surface layer	thermal adaptability -50~+200ºC	Semiconductor equipment precision vibration isolation

2.Delve into the classical structure and its nuanced classifications to enhance understanding.

structure type	operational principle	typical parameter	application scenarios
Compressed shock absorber	The rubber column is deformed by the axial compression	Scirrhosity60-90 ShoreA,compression ratio≥30%	Car suspension, machine tool shock absorption
Cut-type shock absorber	Rubber sheets produce shear deformation under shear sheets	shear modulus≥10MPa,thickness2-5mm	Electronic equipment, building vibration isolation
Compound shock absorber	Rubber + spring / hydraulic pressure works together	Nonlinear stiffness characteristics, with adjustable damping	Heavy machinery, high-speed rail track
Damage liner	Thin-walled rubber sleeve covers the rotating shaft	radial rigidity 50-500N/mm,friction(al) coefficient 0.1-0.3	Rotary shaft frame vibration control

3.Material type selection system: Your roadmap to choosing the best materials.

Rubber type	dynamic modulus (MPa)	temperature range(-40ºC~+150ºC)	oil resistivity (70#)	Typical application
NBR	2-5	-40ºC~+120ºC	Volume change rate<10%	Automobile shock absorber, hydraulic cylinder bushing
EPDM	3-8	-50ºC~+180ºC	Volume change rate<5%	Building vibration isolation cushion, wind power sealing
SBR	2-4	-20ºC~+100ºC	Volume change rate<15%	Industrial floor damping pad
IIR	1-3	-40ºC~+80ºC	Volume change<8%	Precision instrument vibration absorber

4.International standard and test range, ensuring our products meet global benchmarks.

criterion	test project	technical requirement
ISO 9001	quality management system	Whole-process traceability
GB/T 10179	Experimental method of rubber shock absorber	The deformation was <20% after 10 ^ 6 cycles
ASTM D3452	Schematic drawing test	Rehome rate is> 70%
IEC 60068-2-6	Environmental experiments	-40ºC ~ + 85ºC cycle aging

5.Failure mode and structural improvements: Insights into enhancing durability and performance.

failure mode	analysis of causes	Improve the plan
surface checking	UV aging (> 2000h exposure)	Add UV absorber (carbon black N330)
The central hole collapsed	Localized overload (> 150% rated load)	Set the safety factor (≥2.5)
Damage recession	Liquid erosion (ASTM D471 test)	HNBR oil resistant rubber
Install stress cracking	Taper fitting (H7 / p6)	Add flexible spacer (Shaw 30-50A)

6.Typical application scenarios and product types: Explore the versatile uses and types available.

device type	Application site	vibration performance	Type of shock absorber	Type of shock absorber
excavator	Rotary turning platform and walking mechanism	Low-frequency (2-10Hz) axial vibration	Compressed shock absorber	Hardness of Shore A 70-90, compression rate of 30%
crane	Hanging arm, balance beam	Intermediate frequency (10-50Hz) torsional vibration	Cut-type shock absorber	Shear modulus of 15MPa, 5-8mm in thickness
loader	Hanging arm, balance beam	High-frequency (50-200Hz) random vibration	Compound shock absorber	Rubber + metal skeleton, with a damping ratio of ζ =0.8-0.9
road roller	Shbrator, self-walking wheel	Impact load (5-10ms pulse)	hydraulic buffer	Ababsorbed energy 200 kJ with response time <50ms
shield tunneling machine	Spindle drive, pipe segment assembly machine	Multi-axial synchronous vibration (axial + radial)	3 D shock absorption module	Flexible connection design, torsional torque 500 N·m

7.Manufacturing Process Flow: A detailed journey through our production excellence.
1.Material Premixing: The foundation of quality starts with precision premixing.
Hot Feeding System: Temperature control ± 1°C to ensure immaculate material uniformity.
Fiber Dispersion: Achieving 95% dispersion, verified meticulously by a laser particle size analyzer.
2.Molding Process: A sophisticated crafting process to shape excellence.
Compression Molding: With a mold temperature set at 60°C and pressure at 15MPa, a pressure holding time of 30 minutes ensures perfection.
Injection Molding: Versatility with screw speed ranging from 50 to 100 rpm and injection temperature from 80 to 120°C.
Vacuum Vulcanization: Executed at 0.95MPa pressure, 150°C temperature, over a duration of 60 minutes.
3.Reprocessing: Refinement and enhancement for peak performance.
Surface Treatment: Employing a robust spray polyurethane anti-fouling coating with a 0.2mm thickness to endure the harshest conditions.
Performance Optimization: Elevating efficiency by 40% through microwave vulcanization, with precise temperature variance of ± 2°C.